#2MT-A MANDREL

a_mandrel_2bits
a_mandrel_2bitscomplete_bottle_stopper_kit_4_725260735
$25.00 each

#2 Morse taper mandrel has a 3/8" x 16 tpi threaded stud with a tapping flute in the threads making it self-tapping in most wood.  The 13/16" diameter collar is the same size as stopper top.  A spanner hole makes it easy to get leverage when the wood gets difficult to remove.  It is threaded for a 1/4" x 20 tpi drawbar.

Includes 5/16" and 21/64" stub drill bits.  Also includes a 3/8" nylon spacer washer to prevent the wood from getting a death grip on the mandrel.

click for Mandrel Comparison if you are not sure which mandrel to purchase. 

If you have any questions, please don't hesitate to call or email before you order.
717-486-5232     This email address is being protected from spambots. You need JavaScript enabled to view it.

 

5 5 3 Product
List of the comments:
2 of 2 find it helpful
I tried several times to make one of thes myself. They worked "OK" but we're always just a bit out of whack. This Niles jig is as precise as it gets. Makes turning bottle stoppers perfect.
2 of 2 find it helpful
I asked about 20 - 30 questions prior to buying, and was treated with respect each and every time! Highly recommend Niles as a supplier. Mandrel was exactly as stated online. Very Pleased, Thx Ruth! Brad
3 of 3 find it helpful
This mandrel has made turning bottle stoppers easy as can be. Drill it, mount it, turn it and finish it. Nothing could be easier
You must be registered in order to post a comment