Off Center Jig Mandrels

$18.50

 

These mandrels are for using the the Joyner Off-Set Jig.  They have a 3/8″ x 16 tpi threaded stud but do not have the tapping flute in the threads.  All are black oxide coated to prevent rusting.  All Niles products are made in the USA only in Missouri

  • #2MT-A = 7/8″ diameter at the mid section, #2 Morse taper, back threaded 1/4″x20tpi for draw bar.
  • 1.25″ x 8 tpi mandrel, threads on the headstock spindle, does not use a draw bar.
  • 1″ x 8 tpi mandrel, threads on the headstock spindle; does not use a draw bar.

Lathes Specifications: here is a list of lathe spindle sizes and Morse taper if you are not sure.

If you have trouble downloading the spreadsheet, email me and I can email it to you direct. ruthniles@gmail.com

Clear